OUTDOOR

45 ADJ LED 1 Quick shop

flos

45 ADJ LED 1

from $1,345.00

45 ADJ LED 1
45 ADJ LED 1
45 ADJ LED 1
45 ADJ LED 1
45 ADJ LED 1
45 ADJ LED 1
45 ADJ LED 1
flos

45 ADJ LED 1

$1,345.00

This product is only available upon request. Please contact us for a quote.

45 ADJ floor, wall and ceiling lamp provide direct or indirect light. Body, head and cap are extruded anti corodal 6010 aluminum alloy with phosphochromed non-corrosive protection. Reflector is die-cast 46100 aluminum with a surface finish obtained by means of a vacuum aluminization process. The diffusers are available in opal white, or in transparent finish whenever high efficiency is required; the engineering plastics (PC or APEC) used are injection-molded, UV-stabilized. The mechanical joint has two die-cast 46100 aluminum alloy flanges with "yellow alodine" non-corrosive protection.

NOTE: This item requires separate purchase of a lens accessory. Lenses are available in Frosted (F0074071) or Clear (F0074000). Louver (F0056030) Lens accessory is also available. Please contact Customer Service for details.

PRODUCT SPECIFICATIONS

Mounting: Poletop Bottom Entry
Lamp (Bulb) Description: 6 x Power LED 3000K 9W 546lm CRI 80
Environment: Indoor/Outdoor
Finish: Anodized Aluminum

PHYSICAL

Cord Length (inches): 80
Construction Material: Die-cast aluminum
Weight: 3.9 lbs - 4 lbs (teak)

  45 ADJ LED 1 spec sheet
  45 ADJ LED 1 installation + use
View product
45 ADJ LED 2 Quick shop

flos

45 ADJ LED 2

$1,615.00

45 ADJ LED 2
45 ADJ LED 2
45 ADJ LED 2
45 ADJ LED 2
45 ADJ LED 2
45 ADJ LED 2
45 ADJ LED 2
flos

45 ADJ LED 2

$1,615.00

This product is only available upon request. Please contact us for a quote.

5 ADJ floor, wall and ceiling lamp provide direct or indirect light. Body, head and cap are extruded anti corodal 6010 aluminum alloy with phosphochromed non-corrosive protection. Reflector is die-cast 46100 aluminum with a surface finish obtained by means of a vacuum aluminization process. The diffusers are available in opal white, or in transparent finish whenever high efficiency is required; the engineering plastics (PC or APEC) used are injection-molded, UV-stabilized. The mechanical joint has two die-cast 46100 aluminum alloy flanges with "yellow alodine"" non-corrosive protection.

NOTE: This item requires separate purchase of a lens accessory. Lenses are available in Frosted (F0074071) or Clear (F0074000). Louver (F0056030) Lens accessory is also available. Please contact Customer Service for details.

PRODUCT SPECIFICATIONS

Mounting: Poletop Bottom Entry
Lamp (Bulb) Description: Power LED 3000K 9W 546lm CRI 80
Environment: Indoor/Outdoor
Finish: Anodized Aluminum, or Black 

PHYSICAL

Construction Material: Die-cast aluminum
Weight: 5.7 lbs - 6 lbs (teak)


  45 ADJ LED 2 spec sheet
  45 ADJ LED 2 installation and use
View product
45 ADJ LED 3 Quick shop

flos

45 ADJ LED 3

$1,815.00

45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
flos

45 ADJ LED 3

$1,815.00

This product is only available upon request. Please contact us for a quote.

45 ADJ floor, wall and ceiling lamp provide direct or indirect light. Body, head and cap are extruded anti corodal 6010 aluminum alloy with phosphochromed non-corrosive protection. Reflector is die-cast 46100 aluminum with a surface finish obtained by means of a vacuum aluminization process. The diffusers are available in opal white, or in transparent finish whenever high efficiency is required; the engineering plastics (PC or APEC) used are injection-molded, UV-stabilized. The mechanical joint has two diecast 46100 aluminum alloy flanges with "yellow alodine"" non-corrosive protection.

NOTE: This item requires separate purchase of a lens accessory. Lenses are available in Frosted (F0074071) or Clear (F0074000). Louver (F0056030) Lens accessory is also available. Please contact Customer Service for details.

PRODUCT SPECIFICATIONS

Mounting: Poletop Bottom Entry
Lamp (Bulb) Description: 6 x Power LED 3000K 9W 546lm CRI 80
Environment: Indoor/Outdoor
Finish: Anodized Aluminum

PHYSICAL 

Construction Material: Die-cast aluminum
Weight: 8.2 lbs - 8.4 lbs 

  45 ADJ LED 3 spec sheet
  45 ADJ LED 3 installation and use
View product
IPNOS OUTDOOR Quick shop
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
FLOS - Toronto

IPNOS OUTDOOR

$1,345.00

This product is only available upon request. Please contact us for a quote.

Ipnos outdoor light designed by Nicoletta Rossi and Guido Bianch. 

Elegant and minimal, this architectural outdoor light looks great on a terrace or amidst a garden. 

IPNOS outdoor floor lamp providing diffused light. Extruded aluminum frame and anodized in various finishes. LED on the top edges incorporated in the extrusions and protected by transparent PC diffusers. Driver on plug, dimmable switch on chord.

PRODUCT SPECIFICATION

Mounting: Base
Lamp (Bulb) Description: 196 TOP LED 3300K CRI85 - 15W
Environment: Indoor/Outdoor - Wet Locations
Finish: Aluminum Black, aluminum bronze, natural

ELECTRICAL

Voltage: 120
Switching: Switch on black cord
IP Rating: IP55

PHYSICAL

Cord Length (inches): 315" - Black
Construction Material: Aluminum, Polycarbonate
Weight: 2.4 lbs

View product
KTRIBE OUTDOOR F3 Quick shop
KTRIBE OUTDOOR F3
KTRIBE OUTDOOR F3
KTRIBE OUTDOOR F3
KTRIBE OUTDOOR F3
KTRIBE OUTDOOR F3
KTRIBE OUTDOOR F3
flos

KTRIBE OUTDOOR F3

$3,555.00

This product is only available upon request. Please contact us for a quote.

A member of the Ktribe family of products, this inspired lamp provides diffused light specifically for outdoor use. The base and stem support are die-cast aluminum, and its structural parts are galvanized to protect against atmospheric agents. The inner diffuser and bulb holder are injection-molded PC (polycarbonate). The outer diffuser is made from braided, colored PVC tubes, and the inner frame is made of polyester painted, phosphor-chromed aluminum bars. The steel counterweight is cataphoresis treated for effective protection against atmospheric agents. The outer diffuser cover is phosphor-chromed die-cast aluminum. There is a chrome finish.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x 200W T3 or T4 RSC Halogen
Environment: Outdoor
Finish: Panama or green wall

  ktribe outdoor f3 spec sheet

View product
ROMEO OUTDOOR C3 Quick shop

flos

ROMEO OUTDOOR C3

from $2,599.00

ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
ROMEO OUTDOOR C3
flos

ROMEO OUTDOOR C3

$2,599.00

This product is only available upon request. Please contact us for a quote.

Part of the Romeo family by artist Philippe Starck, the Romeo Outdoor C3 moves the eye upwards with a balanced refinement. The outer diffuser is made by weaving colored PVC tube compound with the polyester painted, phospho-chromated aluminum inner tubular frame. The inner diffuser is opal colored, vacuum-formed PC (polycarbonate) that can be removed without tools when the bulb needs to be changed. The diffuser support in anodized and painted die-cast aluminum alloy. The ceiling fitting is die-cast aluminum alloy with a brilliant finish. There is an injection-molded PC (polycarbonate) cover rose. The polished steel stem is 31.5". All painted details have undergone a galvanic phospho-chromate treatment for enhanced corrosion and weather resistance.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x 150W T-10 Medium Frosted Halogen
Environment: Outdoor
Finish: Panama or green wall

PHYSICAL

Construction Material: Die Cast Aluminum, Polycarbonate, PVC, Stainless Steel
Weight: C3 28" 16.1 lbs, C3 36" 16.5 lbs

  romeo outdoor C3 28" spec sheet
  romeo outdoor C3 36" spec sheet
  romeo outdoor C3 installation and use
View product
SUPERARCHIMOON OUTDOOR Quick shop
SUPERARCHIMOON OUTDOOR
SUPERARCHIMOON OUTDOOR
SUPERARCHIMOON OUTDOOR
SUPERARCHIMOON OUTDOOR
SUPERARCHIMOON OUTDOOR
SUPERARCHIMOON OUTDOOR
flos

SUPERARCHIMOON OUTDOOR

$19,735.00

This product is only available upon request. Please contact us for a quote.

A brilliant play on perspective, this outdoor version of the legendary Superarchimoon feels oversized and magnificent. The outer diffuser is created by weaving colored PVC tube compounds with a polyester painted phospho-chromated aluminum tubular internal frame. The inner diffuser is injection-molded opal PC (polycarbonate). Structural parts, including the base support, are galvanized.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x 250W T-10 Medium Frosted Halogen
Environment: Outdoor
Finish: Green Wall or panama

PHYSICAL

Cord Length (inches): 393
Construction Material: Aluminium, special materials for good weather resistance
Weight: 356.5 lbs

  superarchimoon outdoor spec sheet
  superarchimoon outdoor installation and use

View product