LED

45 ADJ LED 3 Quick shop

flos

45 ADJ LED 3

$1,815.00

45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
45 ADJ LED 3
flos

45 ADJ LED 3

$1,815.00

This product is only available upon request. Please contact us for a quote.

45 ADJ floor, wall and ceiling lamp provide direct or indirect light. Body, head and cap are extruded anti corodal 6010 aluminum alloy with phosphochromed non-corrosive protection. Reflector is die-cast 46100 aluminum with a surface finish obtained by means of a vacuum aluminization process. The diffusers are available in opal white, or in transparent finish whenever high efficiency is required; the engineering plastics (PC or APEC) used are injection-molded, UV-stabilized. The mechanical joint has two diecast 46100 aluminum alloy flanges with "yellow alodine"" non-corrosive protection.

NOTE: This item requires separate purchase of a lens accessory. Lenses are available in Frosted (F0074071) or Clear (F0074000). Louver (F0056030) Lens accessory is also available. Please contact Customer Service for details.

PRODUCT SPECIFICATIONS

Mounting: Poletop Bottom Entry
Lamp (Bulb) Description: 6 x Power LED 3000K 9W 546lm CRI 80
Environment: Indoor/Outdoor
Finish: Anodized Aluminum

PHYSICAL 

Construction Material: Die-cast aluminum
Weight: 8.2 lbs - 8.4 lbs 

  45 ADJ LED 3 spec sheet
  45 ADJ LED 3 installation and use
View product
AIM Quick shop

flos

AIM

$999.00

AIM
AIM
AIM
AIM
AIM
AIM
flos

AIM

$999.00

This product is only available upon request. Please contact us for a quote.

Please purchase the Aim Separate Canopy to string together 2 to 5 hardwire Aim Lights.

Designed by R. & E. Bouroullec in 2013. 

AIM pendant lamp. Constructed from varnished aluminum sheet with photo-etched optical polycarbonate shade and Internal reflector of photo-etched ABS. Cable may be adjusted to allow fixture head and light distribution to be aimed. The cable has a total length of 354 inches (9m) and therefore the lamp can be suspended 118 inches (3m) from the ceiling.

Hardwired version is supplied with a 5" diameter canopy to be hardwired directly to a 120V junction box (no additional LED driver is required). A plug-in version with switch (not dimmable) is also available. Please select model of choice when ordering.

PRODUCT SPECIFICATIONS

Mounting: Ceiling Pendant
Lamp (Bulb) Description: 1 x LED 2700K 1250lm CRI 82 - 16W
Environment: Indoor - Dry Location
Finish: aluminum

ELECTRICAL

Voltage: 120
Switching: Dimmable with Leading Edge (Triac) dimmers

PHYSICAL

Cord Length (inches): 354
Construction Material: ABS, Aluminum, PMMA
Weight: 7.1 lbs

  aim spec sheet  
  aim installation + use
View product
AIM SEPARATE CANOPY Quick shop
AIM SEPARATE CANOPY
AIM SEPARATE CANOPY
AIM SEPARATE CANOPY
AIM SEPARATE CANOPY
AIM SEPARATE CANOPY
flos

AIM SEPARATE CANOPY

$75.00

This product is only available upon request. Please contact us for a quote.

To string together 2 to 5 hardwire Aim Lights please purchase the corresponding quantity of AIM Lights.

AIM pendant lamp. Constructed from varnished aluminum sheet with photo-etched optical polycarbonate shade and Internal reflector of photo-etched ABS. Cable may be adjusted to allow fixture head and light distribution to be aimed. The cable has a total length of 354 inches (9m) and therefore the lamp can be suspended 118 inches (3m) from the ceiling.

Hardwired version is supplied with a 5" diameter canopy to be hardwired directly to a 120V junction box (no additional LED driver is required). A plug-in version with switch (not dimmable) is also available. Please select model of choice when ordering.

AIM PRODUCT SPECIFICATIONS

Mounting: Ceiling Pendant
Lamp (Bulb) Description: 1 x LED 2700K 1250lm CRI 82 - 16W
Environment: Indoor - Dry Location
Finish: aluminum

ELECTRICAL

Voltage: 120
Switching: Dimmable with Leading Edge (Triac) dimmers

PHYSICAL

Cord Length (inches): 354
Construction Material: ABS, Aluminum, PMMA
Weight: 7.1 lbs

  aim spec sheet  
  aim installation + use
View product
ARCO Quick shop

flos

ARCO

$3,955.00

ARCO
ARCO
ARCO
ARCO
ARCO
ARCO
flos

ARCO

$3,955.00

This product is only available upon request. Please contact us for a quote.

This lamp is ready for its close-up: Featured in Hollywood classics including Diamonds are Forever and The Italian Job, the Arco is a design icon that has been in constant production since its debut in 1962. The famed Castiglioni brothers spared no detail when they created it, from the beveled corners of its genuine Carrera marble base (designed not to hurt should you brush against them) to the strategic hole that allows for easy lifting of the base.

The base supports a spun aluminum reflector via a curved stainless steel adjustable stem, allowing the lamp to offer both direct and indirect light. The height extends to almost 7-feet, allowing for easy placement of a couch or table underneath.

The finish is stainless steel. The Arco floor lamp is available in LED or incandescent.

PRODUCT SPECIFICATION

Mounting: Free Standing
Lamp (Bulb) Description: 1 x 100W A-21 Medium Silvered Bulb Incandescent or Multichip LED 2700K CRI 93 - 18W
Environment: Indoor - Dry Location
Finish: Stainless

ELECTRICAL

Voltage: 120
Switching: Foot switch on power cord

PHYSICAL

Cord Length (inches): 106
Construction Material: Aluminum, Marble, Stainless steel
Weight: 140.7 lbs

  arco spec sheet
  arco installation + use
View product
CHAPO Quick shop

flos

CHAPO

$655.00

CHAPO
CHAPO
CHAPO
CHAPO
CHAPO
CHAPO
flos

CHAPO

$655.00

This product is only available upon request. Please contact us for a quote.

Throwing one’s hat onto a stand is a seductive and slightly swanky and masculine gesture from bygone times. It has an irreverent and retro charm reminiscent of a cinematographic image that is an inescapable part of our visual baggage. All this underlies the Chapo table lamp, a playful gesture that becomes a three-dimensional and theatrical object, a lamp whose style, character and shape can change depending on the hat that is placed on top of it.

CHAPO table lamp providing direct light. Aluminum structure with photo-etched diffuser. Optical switch on the dimmable base with “Soft Touch” technology adaptor on plug connector with interchangeable plugs. A USB socket on the base enables you to recharge the most common smartphones and tablets (max 1.5A).

PRODUCT SPECIFICATIONS

Mounting: Table Top
Lamp (Bulb) Description: 1 x COB LED 2700K 310lm total CRI93 - 8W
Environment: Indoor - Dry Location
Finish: Chrome

ELECTRICAL

Voltage: 24
Switching: Soft-touch switch on black fabric covered cord

PHYSICAL

Cord Length (inches): 79
Construction Material: Aluminium and PMMA
Weight: 2 lbs

  chapo spec sheet

View product
CLESSIDRA Quick shop

flos

CLESSIDRA

from $849.00

CLESSIDRA
CLESSIDRA
CLESSIDRA
CLESSIDRA
flos

CLESSIDRA

$849.00

This product is only available upon request. Please contact us for a quote.

Inspired by the shape of an hourglass, the Clessidra lamp from Antonio Citterio emits direct and indirect light. Its body—white-painted or chrome-plated—is die-cast aluminum. The diffuser is PMMA (Polymethyl methacrylate), and there is an aluminum wall attachment with a cover in PA66. A white back plate is included to cover a junction box. Non-replaceable, high-efficiency lenses have been specially designed for this piece. A wide range (100-240V) power pack is integrated in the body. Level IP55. Non-dimmable.

Click here for the outdoor version.

PRODUCT SPECIFICATIONS

Mounting: Wall Surface
Lamp (Bulb) Description: 2 x MULTICHIP LED 3000K 600lm CRI 80 - 8 W
Environment: Indoor - Dry Location
Finish: Chrome

ELECTRICAL

Voltage: 12
Switching: NA

PHYSICAL

Construction Material: Aluminum, PMMA
Weight: 2.4 lbs

  clessidra indoor installation and use

View product
D'E-LIGHT Quick shop

flos

D'E-LIGHT

$519.00

D'E-LIGHT
D'E-LIGHT
D'E-LIGHT
D'E-LIGHT
D'E-LIGHT
flos

D'E-LIGHT

$519.00

This product is only available upon request. Please contact us for a quote.

Imagine a light that isn’t just functional, it’s smart: The D’E Light from artist Philippe Starck was designed with the ease of today’s modern lifestyle in mind. Light output is specially designed with Light Guide, providing an optimally oriented light flow that affords unrivaled lighting comfort and can be adjusted to two intensities (50% or 100%).

In addition, the D’E Light LED desk lamp serves as a charging device for a variety of portable devices.

The on/off switch incorporates Soft Touch Technology™.
To ensure compatibility for charging, please select the appropriate model for your device from the following:
- Apple 30-pin connector works with: iPhone (up to version 4), iPad (version 1 & 2), and iPods
- Apple Lightning connector works with: iPhone (5 and later), iPad (retina display), and iPad Mini
- Mini-USB connector works with: all non-Apple devices including HTC, BlackBerry, Samsung Galaxy, Google Nexus

LEGAL NOTICE: Pictures of iPhone, iPad, and iPod are used with the only purpose of describing the functionality of D’E-light. All rights on trademarks and products like iPhone, iPad, and iPod are of exclusive property of the manufacturer, and are not referable to Flos or its affiliates. iPad, iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

PRODUCT SPECIFICATIONS

Mounting: Table Top
Lamp (Bulb) Description: 14 x FLAT PANEL TOP LED 2700K 299lm CRI 85 - 5W
Environment: Indoor - Dry Location
Finish: Chrome

ELECTRICAL

Voltage: 120
Switching: Touch-sensor 2-step dimmer on base

PHYSICAL

Construction Material: Aluminum and zamak
Weight: 2.2 lbs

  d'e-light spec sheet

View product
GOLDMAN Quick shop

flos

GOLDMAN

$655.00

GOLDMAN
GOLDMAN
GOLDMAN
GOLDMAN
GOLDMAN
GOLDMAN
GOLDMAN
GOLDMAN
flos

GOLDMAN

$655.00

This product is only available upon request. Please contact us for a quote.

This well-known design gets a technological twist thanks to artist Ron Gilad, who created the Goldman to feature diffusers made of clear methacrylate and an aluminum frame. There is a USB plug built into the base, as well as an optical switch that is dimmable and features Soft Touch technology. The power cable is 8' 2" (2.5 m) long. The power supply is on a plug with interchangeable sockets.

PRODUCT SPECIFICATION

Mounting: table top
Lamp (Bulb) Description: 42 x LED 420lm total 2700K CRI85 - 8W
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL

Voltage: 12
Switching: Touch-sensor 2-step dimmer on base

PHYSICAL

Cord Length (inches): 98
Construction Material: Aluminum, Methacrylate, Polycarbote, Zamak
Weight: 2 lbs

  goldman spec sheet

View product
HIDE (TRIM ONLY) Quick shop

flos

HIDE (TRIM ONLY)

from $99.00

HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
HIDE (TRIM ONLY)
flos

HIDE (TRIM ONLY)

$99.00

This product is only available upon request. Please contact us for a quote.

HIDE L TRIM decorative trim available in 2 finishes.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: NA
Environment: Indoor - Dry Location
Finish: Aluminized Silver, or photo

ELECTRICAL

Voltage: 12
Switching: NA

PHYSICAL

Construction Material: Aluminum, PMMA

  hide trim only spec sheet
  hide trim only installation and use

View product
IPNOS INDOOR Quick shop

flos

IPNOS INDOOR

$1,249.00

IPNOS INDOOR
IPNOS INDOOR
IPNOS INDOOR
IPNOS INDOOR
IPNOS INDOOR
IPNOS INDOOR
IPNOS INDOOR
flos

IPNOS INDOOR

$1,249.00

This product is only available upon request. Please contact us for a quote.

Created by the dynamic team of Rossi and Bianchi, IPNOS mixes illusion with function—and the result is nothing short of magical. LED lights line the top of its skeletal frame, protected by transparent PC diffusers, to fill this seemingly “empty” cube with a soft, diffused light. There is a footswitch button with a dimmer, allowing for customization of output.

PRODUCT SPECIFICATION
Mounting

Lamp (Bulb) Description 196 TOP LED 2700K CRI85 - 15W
Environment Indoor - Dry Location Finish Aluminum Black

ELECTRICAL

Voltage 100-240V
Switching Dimmer on black cord

PHYSICAL

Cord Length (inches) 118
Construction Material Aluminum, Polycarbonate
Weight 2 lbs

  ipnos spec sheet

View product
IPNOS OUTDOOR Quick shop
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
IPNOS OUTDOOR
FLOS - Toronto

IPNOS OUTDOOR

$1,345.00

This product is only available upon request. Please contact us for a quote.

Ipnos outdoor light designed by Nicoletta Rossi and Guido Bianch. 

Elegant and minimal, this architectural outdoor light looks great on a terrace or amidst a garden. 

IPNOS outdoor floor lamp providing diffused light. Extruded aluminum frame and anodized in various finishes. LED on the top edges incorporated in the extrusions and protected by transparent PC diffusers. Driver on plug, dimmable switch on chord.

PRODUCT SPECIFICATION

Mounting: Base
Lamp (Bulb) Description: 196 TOP LED 3300K CRI85 - 15W
Environment: Indoor/Outdoor - Wet Locations
Finish: Aluminum Black, aluminum bronze, natural

ELECTRICAL

Voltage: 120
Switching: Switch on black cord
IP Rating: IP55

PHYSICAL

Cord Length (inches): 315" - Black
Construction Material: Aluminum, Polycarbonate
Weight: 2.4 lbs

View product
KELVIN LED F Quick shop

flos

KELVIN LED F

$785.00

KELVIN LED F
KELVIN LED F
KELVIN LED F
KELVIN LED F
KELVIN LED F
KELVIN LED F
KELVIN LED F
flos

KELVIN LED F

$785.00

This product is only available upon request. Please contact us for a quote.

Part of the popular Kelvin LED family, the Kelvin LED F floor lamp features the collection’s signature square head and utilizes the latest technology to provide precise customization of output. The three-step on/off switch utilizes Soft Touch technology, and the base cover is injection-printed PC (polycarbonate). The head is directional, the counterweight is an iron cut painted through a process of cataphoresis. The base separates from the lamp body, held in place with a safety-locking pin.

PRODUCT SPECIFICATIONS

Mounting: free standing
Lamp (Bulb) Description: 30 x TOP LED 2700K 275lm CRI 95 - 8W Dimming
Environment: Indoor - Dry Location
Finish: Anthracite

ELECTRICAL

Voltage: 12
Switching: Touch-sensor 3-step dimmer (100%-66%-33%) on lamp head

PHYSICAL

Construction Material: Aluminum
Weight: 8.4 lbs

  kelvin led f spec sheet
  kelvin led f installation and use

View product
KELVIN LED GREEN MODE I Quick shop
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
KELVIN LED GREEN MODE I
flos

KELVIN LED GREEN MODE I

$585.00

This product is only available upon request. Please contact us for a quote.

KELVIN LED GREEN MODE I adjustable table lamp providing direct lighting, with double pantograph arm and adjustable head. Fused aluminum alloy body. Die-cast aluminum outer head, with injection-molded methacrylate diffuser.

Base external cover in ABS. Extruded aluminum alloy square tube structure, machined mechanically, so that it houses a stainless steel load-compensation spring and injection-molded acetal resin sliding blocks. 3 mm diameter wire outer tie rods.The ON/OFF switch is electronic with optical mechanism located in the head.

The new Kelvin LED GREEN is offered in 2 different modes:
- Kelvin LED GREEN I with Daylight Sensor
- Kelvin LED GREEN II with Daylight Sensor & Motion Sensor

In order to activate the Daylight/Motion Sensor, simply keep your finger on the touch sensor switch on lamp head for a few seconds until it turns from orange to green. Once the Daylight Sensor is activated, Kelvin LED Green Mode I & II will automatically adjust its light output by responding to the brightness of the work surface it is illuminating. You can revert back to manual mode by pressing down on the sensor switch for a few seconds again.

The FLOStouchTM Technology touch sensor switch is active at all times allowing for manual control of ON/OFF switch and bypassing the Motion Detector. The Daylight Sensor and Motion Sensor function independently of each other.

PRODUCT SPECIFICATION

Mounting: table top
Lamp (Bulb) Description: 30 x TOP LED 3000K 325lm CRI95 - 7.5W
Environment: Indoor - Dry Location
Finish: Anthracite 

ELECTRICAL

Voltage: 120
Switching: Touch-sensor 3-step dimmer (100%-66%-33%) on lamp head

PHYSICAL

Construction Material: Aluminum and zamak
Weight: 11 lbs


  base spec sheet 
  desk clamp spec sheet
  desk (hidden cable) spec sheet
  desk (visible cable) spec sheet 
  wall mount spec sheet

 installation and use

View product
KELVIN LED GREEN MODE II Quick shop
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
KELVIN LED GREEN MODE II
flos

KELVIN LED GREEN MODE II

$655.00

This product is only available upon request. Please contact us for a quote.

KELVIN LED GREEN MODE II adjustable table lamp providing direct lighting, with double pantograph arm and adjustable head. Fused aluminum alloy body. Die-cast aluminum outer head, with injection-molded methacrylate diffuser.

Base external cover in ABS. Extruded aluminum alloy square tube structure, machined mechanically, so that it houses a stainless steel load-compensation spring and injection-molded acetal resin sliding blocks. 3 mm diameter wire outer tie rods.The ON/ OFF switch is electronic with optical mechanism located in the head.

The new Kelvin LED GREEN is offered in 2 different modes:
- Kelvin LED GREEN I with Daylight Sensor
- Kelvin LED GREEN II with Daylight Sensor and Motion Sensor

In order to activate the Daylight/Motion Sensor, simply keep your finger on the touch sensor switch on lamp head for a few seconds until it turns from orange to green. Once the Daylight Sensor is activated, Kelvin LED Green Mode I and II will automatically adjust its light output by responding to the brightness of the work surface it is illuminating. You can revert back to manual mode by pressing down on the sensor switch for a few seconds again.

The FLOStouch (TM) Technology touch sensor switch is active at all times allowing for manual control of ON/OFF switch and bypassing the Motion Detector. The Daylight Sensor and Motion Sensor function independently of each other.

PRODUCT SPECIFICATION

Mounting: Lamp
(Bulb) Description: 30 x TOP LED 3000K 325lm CRI95 - 7.5W
Environment: Indoor - Dry Location
Finish: Anthracite, Chrome, Glossy White or Glossy Black

PHYSICAL

Construction Material: Aluminum and zamak
Weight: 11 lbs

  spec sheet
  installation and use

View product
LIGHT PHOTON Quick shop

flos

LIGHT PHOTON

$6,535.00

LIGHT PHOTON
LIGHT PHOTON
LIGHT PHOTON
LIGHT PHOTON
LIGHT PHOTON
LIGHT PHOTON
LIGHT PHOTON
flos

LIGHT PHOTON

$6,535.00

This product is only available upon request. Please contact us for a quote.

It’s a new twist on “screen-time:” This innovative design from Philippe Starck offers the latest technology to create a piece that doesn’t just illuminate, it contributes to a greater good. Light Photon utilizes organic LED (OLED) technology—a unique solution that highlights building large, light-emitting surface sources instead of inorganic LED (which is powerful but uses small surface components). OLED light sources have the appearance of a thin foil of light laminated between two high purity glass sheets, and they can be directly recycled in the existing glass waste chain, which classifies OLED among the most environmentally friendly light sources.

Light Photon is equipped with OLED and operates by using the latest developments in nanotechnology and functional chemistry. It is made of a complex stack of thin molecular layers of organic materials that produce white light. The full diode, including electrodes, is 200nm thick, and is constructed in an extra pure and clean environment. To celebrate the FLOS 50th Anniversary, Light Photon was put in production beginning on September 28, 2012 for a limited edition of 500 pieces. Each piece is uniquely numbered.

This adjustable table lamp provides diffused lighting.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x OLED 3000K 8.3 lm/W CRI75 - 50W
Environment: Indoor - Dry Location
Finish: Stainless steel

ELECTRICAL

Voltage: 120
Switching: Plug with interchangeable sockets

PHYSICAL

Cord Length (inches): 138
Construction Material: Stainless steel
Weight: 9 lbs

  light photon spec sheet

View product
LIGHT SPRING DOUBLE Quick shop
LIGHT SPRING DOUBLE
LIGHT SPRING DOUBLE
LIGHT SPRING DOUBLE
LIGHT SPRING DOUBLE
LIGHT SPRING DOUBLE
flos

LIGHT SPRING DOUBLE

$785.00

This product is only available upon request. Please contact us for a quote.

Inspired by the classic candelabra wall lamp, the Light Spring Double is artist Ron Gilad’s modern take on the iconic silhouette with updated technology to match.

The Light Spring Double provides indirect light. It features an injection-molded diffuser in methacrylate with a photoengraved internal finish. The diffuser is fixed to the body by a nickel-plated neodymium magnet. The head is cast aluminum alloy. The wall attachment is injection molded in nylon PA 6.6 white, 20% fiberglass. The rose is in cast aluminum alloy. The body is in extruded calendared aluminum. The feed for the LED is located within the rose. Each head can be rotated 45-degrees on a vertical axis. The components are finished with a water-based, eco-friendly spray paint.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 14 + 14 LED 2700K 640lm CRI 80 - 9 W
Environment; Indoor - Dry Location
Finish: White

ELECTRICAL

Voltage: 120

PHYSICAL

Construction Material: Aluminum, Methacrylate
Weight: 2.6 lbs

  light spring double spec sheet
  light spring double installation and use

View product
LIGHT SPRING SINGLE Quick shop
LIGHT SPRING SINGLE
LIGHT SPRING SINGLE
LIGHT SPRING SINGLE
LIGHT SPRING SINGLE
LIGHT SPRING SINGLE
flos

LIGHT SPRING SINGLE

$519.00

This product is only available upon request. Please contact us for a quote.

Inspired by the classic candelabra wall lamp, the Light Spring Single Double is artist Ron Gilad’s modern take on the iconic silhouette with updated technology to match.

The Light Spring Single provides indirect light. It features an injection-molded diffuser in methacrylate with a photoengraved internal finish. The diffuser is fixed to the body by a nickel-plated neodymium magnet. The head is cast aluminum alloy. The wall attachment is injection molded in nylon PA 6.6 white, 20% fiberglass. The rose is in cast aluminum alloy. The body is in extruded calendared aluminum. The feed for the LED is located within the rose. Each head can be rotated 45-degrees on a vertical axis. The components are finished with a water-based, eco-friendly spray paint.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 14 LED 2700K 320lm CRI 80 - 4,5 W
Environment: Indoor - Dry Location
Finish: White

ELECTRICAL

Voltage: 120

PHYSICAL

Construction Material: Aluminum, Methacrylate
Weight: 0.5

  light spring single spec sheet
  light spring single installation and use

View product
LONG LIGHT Quick shop

flos

LONG LIGHT

$575.00

LONG LIGHT
LONG LIGHT
LONG LIGHT
LONG LIGHT
LONG LIGHT
flos

LONG LIGHT

$575.00

This product is only available upon request. Please contact us for a quote.

Showcasing the artist’s minimalist style, the Long Light by Piero Lissoni is an unassuming fixture that dazzles with a surprising indirect light. The body is painted extruded aluminum. It features lateral friezes in pressofused aluminum turned up to 45-degrees via digital control to ensure a perfect fit with the lamp body. Diffusers are injection-printed PMMA (Polymethyl methacrylate) with a photoengraved finish. There is an injection-printed wall attachment in PA66. A multi-voltage power pack is integrated in the body. Comes with a back plate to cover a standard junction box. Non-dimmable.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 28 x TOP LED 3000K 854lm CRI 80 - 12 W
Environment: Indoor - Dry Location
Finish: White

ELECTRICAL

Voltage: 120
Switching: NA

PHYSICAL

Construction Material: Aluminum, PMMA
Weight: 2.4 lbs

  long light spec sheet
  long light installation and use

View product
MINI KELVIN LED Quick shop
MINI KELVIN LED
MINI KELVIN LED
MINI KELVIN LED
MINI KELVIN LED
MINI KELVIN LED
MINI KELVIN LED
MINI KELVIN LED
flos

MINI KELVIN LED

$499.00

This product is only available upon request. Please contact us for a quote.

The smallest member of the Kelvin LED family, this tiny but powerful table lamp is the result of a creative collaboration between Antonio Citterio and Toan Nguyen. The lamp head—which can change direction—is presso-fused aluminum, and the diffuser is photoengraved methacrylate with an aluminate surround. The MiniKelvin LED features a power pack on its plug, and its base is pressofused Zamak. There is an on/off switch with Soft Touch technology and light flow adjustment for two intensities (100%, 50%, and 0%). Includes interchangeable plugs.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 36 x TOP LED 3000K 216lm CRI 85 - 4W
Environment: Indoor - Dry Location
Finish: Chrome

ELECTRICAL

Voltage: 120
Switching: NA 

PHYSICAL

Construction Material: Aluminum 
Weight: 1.8 lbs

  mini kelvin LED spec sheet

View product
MOD.2129 Quick shop

flos

MOD.2129

$3,895.00

MOD.2129
MOD.2129
MOD.2129
MOD.2129
MOD.2129
MOD.2129
flos

MOD.2129

$3,895.00

This product is only available upon request. Please contact us for a quote.

There’s something intimate about the ambiance created by the Mod 2129: Swooping in from overhead, it wraps you up in warmth and brings your attention to everything its light touches. Created by the legendary Gino Sarfatti, this droplight features a counterweight and an arc made of transparent methacrylate that is attached to the ceiling yet offers a 360-degree rotation. The cup-shaped reflector is made of two lathed aluminum pieces painted white and caviar grey. The dowel for the ceiling fitting and the counterweight are in painted brass. This product comes in special packaging.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 355 LED 2700K 1600lm total CRI 90 - 25W
Environment: Indoor - Dry Location
Finish: White

ELECTRICAL

Voltage: 120
Switching: NA

PHYSICAL

Cord Length (inches): 276
Construction Material: Brass, Steel
Weight: 10 lbs

  MOD.2129 spec sheet

View product
MOD.548 Quick shop

flos

MOD.548

$1,965.00

MOD.548
MOD.548
MOD.548
MOD.548
MOD.548
MOD.548
flos

MOD.548

$1,965.00

This product is only available upon request. Please contact us for a quote.

Design master Gino Sarfatti once again illustrates his ability to alter perspective through the innovative use of light and illusion. The Mod 548 provides direct and diffused light. Its adjustable spotlight—in white painted aluminum—is mounted on a tubular stem that is finished in polished or burnished brass. The cup-shaped diffuser, which is available in white, blue, or orange methacrylate, gives the piece an original feel. The brass bar at the base acts as a counterweight.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x LED 2700K 730 lm total CRI90 - 11W
Environment: Indoor - Dry Location
Finish: Blue, or orange

ELECTRICAL

Voltage: 120
Switching: NA

PHYSICAL

Cord Length (inches): 110
Construction Material: Brass, Steel

  mod.548 spec sheet

View product
MOD.607 Quick shop

flos

MOD.607

$1,965.00

MOD.607
MOD.607
MOD.607
MOD.607
MOD.607
MOD.607
flos

MOD.607

$1,965.00

This product is only available upon request. Please contact us for a quote.

Since Gino Sarfatti designed the original in 1971, the ultra-modern Mod 607 has gotten a technological upgrade with modern LED technology.

Emitting direct light, this unique piece is made up of two elements snapped together: a disc-shaped diffuser with a truncated cone section of painted aluminum and craquelé finish and a slanted, parallel-piped base in painted aluminum. The switch—featuring a dimmer—is located on the front foot of the base. 

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 42 x LED 2700K 1200 lm CRI85 - 18W
Environment: Indoor - Dry Location
Finish: Black or white

ELECTRICAL

Voltage: 120
Switching: NA

PHYSICAL

Cord Length (inches): 78
Construction Material: Brass, Steel
Weight: 13.4 lbs

  mod.607 spec sheet

View product
OK Quick shop

flos

OK

from $915.00

OK
OK
OK
OK
OK
OK
OK
OK
OK
flos

OK

$915.00

This product is only available upon request. Please contact us for a quote.

A pendant light that feels as at home in an industrial space as it would in museum exhibit: The OK Light plays with expectations to provide functional light that is surprising and easily directed. It features an ultra-flat LED surface with edge-lighting technology that can be directed over 360 degrees. The electronic components are housed in a small rectangular box that slides vertically over the metal wire of the lamp, which is balanced by a cone-shaped counterweight. The OK Light features a soft-touch switch.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: EDGE LIGHTING TECHNOLOGY - 2700K - 1638lm - CRI85 - 18W
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL

Switching: Optical Switch with dimmer on black cord

PHYSICAL

Cord Length (inches): 157
Construction Material: Aluminum, PMMA
Weight: 6.4 lbs

  OK install and use

View product
PIANI Quick shop

flos

PIANI

$459.00

PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
PIANI
flos

PIANI

$459.00

This product is only available upon request. Please contact us for a quote.

What will you shine the light on? Created by Ronan and Erwan Bouroullec, the flat base of the Piani takes the feel of a stage when a triangular beam of light—like a spotlight—shines on whatever is placed upon it.

The top of the lamp, like the base, is flat. The injection-printed lamp body is ABS. The dissipater is polished, die-cast aluminum. The diffuser is injection-printed optical PMMA (Polymethyl methacrylate). There is an electric transformer on the plug, and the on/off function is accessed via a switch on the cable.

Piani is a non-dimmable lamp. It is available in plastic or oak wood and basalt stone.

Inspiration behind the design:

Ronan and Erwan Bouroullec created the Piani as a mini stage, giving everyday objects the chance to shine.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 14 x TOP LED 2700K 336lm CRI 90 - 5W
Environment: Indoor - Dry Location
Finish: White, black, green, red or wood

ELECTRICAL

Switching: ON-OFF switch on power cord

PHYSICAL

Cord Length (inches): 63
Construction Material: ABS, Aluminum, PMMA
Weight: 3.7 lbs

  piani abs spec sheet
  piani wood spec sheet

View product
SHADE LED Quick shop

flos

SHADE LED

$1,179.00

SHADE LED
SHADE LED
SHADE LED
SHADE LED
SHADE LED
flos

SHADE LED

$1,179.00

This product is only available upon request. Please contact us for a quote.

SHADE floor lamp providing diffused light.

Shade redefined the word "lampshade"; and its fixed perspective and is an effortless way to have warm ambience light with a touch of surrealism.

The magic of Shade is achieved by avoiding the conventional way of using mains power from the ceiling, and with it intrusive fittings and flex. Instead, power derives from an LED floor fitting shining an uplight into the paper shade, which in turn is suspended from the ceiling with next-to-invisible, capillary-thin wires. Paul Cocksedge adds: "Shade has an almost dream-like mystery. It utilizes floor and ceiling both, but appears unconnected to either...!"

Diffuser in foldable paper with floor light source in black aluminum

PRODUCT SPECIFICATION

Mounting: Base
Lamp (Bulb) Description: 1 COB LED - 3000lm tot - CRI83 - 30W - 2700K
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL

Voltage: 120
Switching: Footswitch button w/ dimmer
IP Rating: IP20

PHYSICAL

Construction Material: Aluminum, Paper
Weight: 5.5 lbs

  shade spec sheet
  shade installation and use

View product
STRING LIGHTS Quick shop

flos

STRING LIGHTS

from $915.00

STRING LIGHTS
STRING LIGHTS
STRING LIGHTS
STRING LIGHTS
STRING LIGHTS
STRING LIGHTS
STRING LIGHTS
flos

STRING LIGHTS

$915.00

This product is only available upon request. Please contact us for a quote.

Necessary Accessories to be purchased with this light:
STRING LIGHT CANOPY
STRING LIGHT BASE

A play of graceful light overhead, String Lights by Michael Anastassiades adds a streamlined sophistication to your home or office. Providing diffused light, the suspension lamp features a matte black varnished die-cast aluminum body coated with clear soft-touch varnish. The optical diffuser is opal PC (polycarbonate). The suspension system is 12- or 22- meters, with Kevlar reinforced coaxial cable.

This fixture should be relaxed and then re-tightened approximately 24-hours after installation.

Please note: String Lights should be connected to an on/off switch. Dimming capability is only possible for electronics with an optical mechanism, and can be operated either via an app or by using the sensor on the luminare.

This item requires the separate purchase of either a wall/ceiling connection CANOPY or BASE power supply with floor switch. Please select the appropriate Model/Color combination when making your purchase.

Please inquire for further details with customer service for installation guidance and refer to the Installation Guide. You can also watch the installation video here.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 LED ARRAY 2700K 1910 lm CRI90 - 26W
Environment: Indoor - Dry Location
Finish: Black 

ELECTRICAL

Voltage: 120

PHYSICAL

Cord Length (inches): 472
Construction Material: Aluminum, Polycarbonate

  string lights cone 12m spec sheet
  string lights cone 22m spec sheet
  string lights round 12m spec sheet
  string lights round 22m spec sheet
  string lights installation and use

View product
STRING LIGHTS BASE Quick shop
STRING LIGHTS BASE
flos

STRING LIGHTS BASE

$655.00

This product is only available upon request. Please contact us for a quote.

Other necessary accessories to be purchased with the STRING LIGHT:
STRING LIGHT CANOPY

 STRING LIGHTS suspension lamp providing diffused light. Matt black varnished diecast aluminum body coated with clear soft-touch varnish. Optical diffuser in opal PC. Suspension system of 12 or 22 meters with Kevlar reinforced coaxial cable (the fixture should be relaxed and then re-tightened 24-hours after installation).

NOTE: Please connect the String Lights to an on/off switch. Dimming capability is only possible for electronics with optical mechanism and can be operated either with our app or by using the sensor on the luminaire.

This item requires the separate purchase of either a wall/ceiling connection CANOPY or BASE power supply with floor switch. Please select the appropriate Model/Color combination when making your purchase.

Please inquire for further details with customer service for installation guidance and refer to the Installation Guide. You can also watch the installation video here.

STRING LIGHT PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 LED ARRAY 2700K 1910 lm CRI90 - 26W
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL

Voltage: 120

PHYSICAL

Cord Length (inches): 472
Construction Material: Aluminum, Polycarbonate

  string lights cone 12m spec sheet
  string lights cone 22m spec sheet
  string lights round 12m spec sheet
  string lights round 22m spec sheet
  string lights installation and use

View product
STRING LIGHTS CANOPY Quick shop
STRING LIGHTS CANOPY
flos

STRING LIGHTS CANOPY

$389.00

This product is only available upon request. Please contact us for a quote.

Other necessary accessories to be purchased with the STRING LIGHT:
STRING LIGHT BASE

STRING LIGHTS suspension lamp providing diffused light. Matt black varnished diecast aluminum body coated with clear soft-touch varnish. Optical diffuser in opal PC. Suspension system of 12 or 22 meters with Kevlar reinforced coaxial cable (the fixture should be relaxed and then re-tightened 24-hours after installation).

NOTE: Please connect the String Lights to an on/off switch. Dimming capability is only possible for electronics with optical mechanism and can be operated either with our app or by using the sensor on the luminaire.

This item requires the separate purchase of either a wall/ceiling connection CANOPY or BASE power supply with floor switch. Please select the appropriate Model/Color combination when making your purchase.

Please inquire for further details with customer service for installation guidance and refer to the Installation Guide. You can also watch the installation video here.

STRING LIGHT PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 LED ARRAY 2700K 1910 lm CRI90 - 26W
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL

Voltage: 120

PHYSICAL

Cord Length (inches): 472
Construction Material: Aluminum, Polycarbonate

  string lights cone 12m spec sheet
  string lights cone 22m spec sheet
  string lights round 12m spec sheet
  string lights round 22m spec sheet
  string lights installation and use
View product
TAB F Quick shop

flos

TAB F

$655.00

TAB F
TAB F
TAB F
TAB F
TAB F
flos

TAB F

$655.00

This product is only available upon request. Please contact us for a quote.

Brought to life by the design duo of E. Barber and J. Osgerby in 2011, the Tab F floor lamp is a tribute to the spirit of innovation. This modern floor lamp has an adjustable head with a 45-degree rotation capability and a body painted with pressofused aluminum. Its multi-led diffuser is specially designed PMMA (Polymethyl methacrylate), created to avoid “multi-shadow” effect and dazzle.

The Tab-F, which emits direct light, is available in black or white.

Inspiration behind the design:

E. Barber and J. Ogersby keep one goal in mind when they begin a creation: Challenge everything. “When we are commissioned to design a product, we seek to re-evaluate the archetype, to challenge precedents. We always look at different ways in which products can be manufactured, not necessarily by using new materials or radical re-thinking, but maybe by using existing techniques in a more original or intelligent way.”

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 14 x LED 3000K 425lm CRI 80 - 5W
Environment: Indoor - Dry Location
Finish: Black or white

ELECTRICAL

Voltage 120
Switching ON-OFF switch on power cord

PHYSICAL

Cord Length (inches): 78
Construction Material: Die Cast Aluminum, PMMA
Weight: 4.4 lbs

  tab f spec sheet
  tab f installation and use

View product
TAB T Quick shop

flos

TAB T

$495.00

TAB T
TAB T
TAB T
TAB T
TAB T
TAB T
flos

TAB T

$495.00

This product is only available upon request. Please contact us for a quote.

Part of the Tab family created by the design duo of E. Barber and J. Osgerby in 2011, the Tab T table lamp is a tribute to the spirit of innovation. This modern style has an adjustable head with a ±45-degree rotation capability and a body painted with pressofused aluminum. Its multi-LED diffuser is specially designed PMMA (Polymethyl methacrylate), created to avoid “multi-shadow” effect and dazzle. 

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 14 LED 3000K 425lm CRI80 - 7W
Environment: Indoor - Dry Location
Finish: Black

ELECTRICAL 

Voltage 120
Switching ON-OFF switch on power cord

PHYSICAL 

Cord Length (inches): 63
Construction Material: Die Cast Aluminum, PMMA
Weight: 1.8 lbs

  tab t spec sheet
  tab t installation and use

View product
TACCIA Quick shop

flos

TACCIA

$3,955.00

TACCIA
TACCIA
TACCIA
TACCIA
TACCIA
TACCIA
TACCIA
flos

TACCIA

$3,955.00

This product is only available upon request. Please contact us for a quote.

The Castiglioni brothers often created designs that challenged our perspective, and the Taccia, which gives the illusion of an upside-down hanging lamp, is an inspired example of that. Designed by the famed duo in 1962, the Taccia has a concave spun-aluminum reflector with a matte white finish. Its light can be adjusted by positioning the blown glass diffuser as necessary. Its base is made of extruded aluminum and is available in an anodized matte black or natural sandblasted finish.

The Taccia emits reflected light. It is available in black/anodized aluminum and has two options for its light source:
- HSGSR
- Remote Phosphor LED

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 1 x 60W PAR 30 Halogen
Environment: Indoor - Dry Location
Finish: Anodized Aluminum or black

ELECTRICAL 

Voltage: 120
Switching: Power cord with ON-OFF switch 

PHYSICAL 

Cord: Length (inches) 94
Construction Material: Aluminum, Glass
Weight: 24 lbs

  taccia spec sheet 

  taccia installation and use

View product
TIGHT LIGHT Quick shop

flos

TIGHT LIGHT

$625.00

TIGHT LIGHT
TIGHT LIGHT
TIGHT LIGHT
TIGHT LIGHT
flos

TIGHT LIGHT

$625.00

This product is only available upon request. Please contact us for a quote.

Designed by Piero Lissoni in 2011, the Tight Light plays on the perspective of size with outstanding results. The main body of this wall lamp is made of white painted extruded aluminum. The lateral friezes are die-cast aluminum and have been rotated to 45-degrees using digital control in order to flow seamlessly with the lights body. The injection-printed PMMA (Polymethyl methacrylate) diffusers have a photo-engraved finish and the attachment is PA66. The junction box is covered with a back plate. The profile is shaped like the letter "T" for "Tight Light.”

The Tight Light offers indirect light. It is non-dimmable.

PRODUCT SPECIFICATION

Lamp (Bulb) Description: 48 x TOP LED 3000K 1460lm CRI 80 - 9 + 9 W
Environment: Indoor - Dry Location
Finish: White

ELECTRICAL 

Voltage: 12
Switching: NA

PHYSICAL 

Construction Material: Aluminum, PMMA
Weight: 2.5 lbs

  tight light spec sheet
  tight light installation and use

View product